What are the Requirements for Storage and Preservation of Single Row Tapered Roller Bearings?

Single row tapered roller bearings storage and storage requirements for the warehouse:

1. The storage room shall not leak rain, bearing storage location should avoid direct sunlight, indoor air should be circulated, but shall not have dust invasion, the storage room should be set up ventilation equipment and temperature control equipment.

2. The warehouse should be kept dry, the relative humidity should be controlled at 80% or less, the indoor temperature should be controlled at 25℃ and 10℃, and there should be no big temperature difference between day and night. The temperature is too low. If the temperature is too high, the antirust agent will be easily lost (evaporated) or degraded, and the temperature difference between day and night will cause moisture to condense on the bearing surface and cause rust. In winter, the bearing storage location should not be close to the heating.

3. The ground in the warehouse should be hard and not easy to get dusty.

4. Bearings should not be stored in the same warehouse with acid, alkali, salt and other corrosive materials, chemical raw materials, and materials with large moisture. The storage room around the bearing should not be disturbed by harmful gases.

Single row tapered roller bearings storage requirements:

1. The storage should check whether the outer packaging is intact, once the outer packaging is found to be damaged or eroded by rain and snow need to open the box for inspection.

2. Open the box to check the quantity and quality of the product, the certificate of conformity, check the specifications, manufacturer, factory date, etc. Yarding requirements.

1) For bearings with outer diameter below 200 mm, the shelves should be placed horizontally, and the height of the yard should be appropriate to prevent the bearings from being deformed by pressure or falling. For bearings with outer diameter of 200mm or more, they should be placed horizontally on the partition set 200mm from the ground to avoid the erosion of moisture. The yard should be placed lightly and smoothly, and placed neatly and firmly to prevent falling.

2) The products should be classified and placed according to the product type and specification, tolerance level, manufacturer and manufacturing date.

Contact us for more details:

E-mail: emily@gainhui.com

Tel: +86-029-88692376

Mob/WhatsApp: +86-18710850036